Skip to content
AccessStore.lk – Simplifying Technology
Switch Pro Max 48 PoE
Order basis
01 / 04 · Front
Ubiquitiswitches · UniFi

Switch Pro Max 48 PoE

Product code
USW-PRO-MAX-48-POE
Brand
Ubiquiti
Warranty
Manufacturer warranty warranty

Order basis

Price on request

Contact us for a quotation.

A professional-grade, 48-port Layer 3 Etherlighting switch with high-power PoE++ output, built for offices, campuses and multi-site networks that need multi-gigabit access and 10G uplinks in a single rack unit. Price on request — contact us for a quote.

    WhatsAppCall us
    • Islandwide delivery
    • Genuine product
    • Technical guidance

    Overview

    The Switch Pro Max 48 PoE combines 32 gigabit ports and 16 multi-gigabit 2.5G ports with four 10G SFP+ uplinks, so a full floor of access points, cameras, phones and workstations can run off one switch while the uplinks stay uncongested. Every RJ45 port delivers PoE, with a 720W total budget that covers high-draw devices such as PTZ cameras and multi-radio access points alongside standard PoE gear. Etherlighting ports illuminate to show port location, speed and link state and native VLAN, which makes tracing a cable or spotting a dead port a glance job instead of a hunt through the rack. Layer 3 switching with inter-VLAN routing keeps traffic segmented without a separate router for every VLAN, and the 1.3-inch touchscreen with AR management puts live port status on the front panel. A USP RPS DC input keeps the switch running through a power-supply failure, and the whole unit is managed from the UniFi Network application alongside the rest of the site.

    Last updated:

    At a glance

    Ports
    32× GbE RJ45 (24× PoE+, 8× PoE++), 16× 2.5 GbE RJ45 (8× PoE+, 8× PoE++), 4× 10G SFP+
    Switching
    Layer 3, Etherlighting
    Switching capacity
    224 Gbps
    Total non-blocking throughput
    112 Gbps
    Availability
    Order basis
    Warranty
    Manufacturer warranty
    • Switch Pro Max 48 PoE
    • Switch Pro Max 48 PoE
    • Switch Pro Max 48 PoE

    Specifications

    Full technical details for the Ubiquiti Switch Pro Max 48 PoE. Need help comparing models? Our team can advise.

    Switch Pro Max 48 PoE specifications
    BrandUbiquiti
    Product codeUSW-PRO-MAX-48-POE
    Ports32× GbE RJ45 (24× PoE+, 8× PoE++), 16× 2.5 GbE RJ45 (8× PoE+, 8× PoE++), 4× 10G SFP+
    SwitchingLayer 3, Etherlighting
    Switching capacity224 Gbps
    Total non-blocking throughput112 Gbps
    Forwarding rate167 Mpps
    Total PoE budget720W
    Max. power consumption100W (excl. PoE) / 820W (incl. PoE)
    Form factorRack mount, 1U
    Dimensions442.4 x 400 x 44 mm
    Weight6.2 kg without mounting brackets, 6.3 kg with mounting brackets
    Display1.3" touchscreen with AR switch management
    Power backupUSP RPS DC input
    ManagementUniFi Network 8.0.24 and later
    Operating temperature-5 to 40° C
    EnclosureSGCC steel
    WarrantyManufacturer warranty

    FAQ

    Switch Pro Max 48 PoE FAQs

    Answers to common questions about this product.

    How many devices can this switch power?

    All 48 RJ45 ports supply PoE, with a 720W total budget. That covers a mix of access points, cameras, phones and other PoE devices — the exact device count depends on how much power each device draws, so check the per-device draw against the 720W budget.

    What is the difference between the gigabit and 2.5G ports?

    The 32 gigabit ports suit standard endpoints, while the 16 multi-gigabit 2.5G ports suit high-throughput devices such as WiFi 7 access points and multi-gig workstations. The four 10G SFP+ ports are uplinks to a core or aggregation switch.

    What does Etherlighting do?

    Etherlighting ports light up to indicate port location, speed and link state and the port's native VLAN, so you can identify a port and its status at a glance in a dense rack.

    Is this a Layer 3 switch?

    Yes. It supports Layer 3 switching with inter-VLAN routing, so VLANs can route between each other on the switch itself without every VLAN needing a separate router hop.

    How is it managed, and what happens if the power supply fails?

    It is managed from the UniFi Network application, with a touchscreen on the front panel for local status. A USP RPS DC input provides power-supply redundancy when paired with a UniFi Power Backup unit.

    Downloads

    Datasheet on requestWe'll email you the manufacturer datasheet.Request
    Warranty & supportManufacturer warranty warranty · setup help from our team

    Related accessories

    Everything you need to install and run the Switch Pro Max 48 PoE.

    Complete your setup

    Select the accessories you need for the Switch Pro Max 48 PoE and add them to your cart in one go.

    0 selectedLKR 0

    Customer reviews

    No reviews yet. Bought the Switch Pro Max 48 PoE? Be the first to share your experience.

    Reviews from customers who bought this product will appear here.

    Can't find the product you're looking for?

    Send us the product name, model number, or required specification, and our team will quote a suitable option. Call +94 76 101 9946 or send a quote request.

    Request a quote

    Sign up for our newsletter

    Get the latest product updates and exclusive offers.